▣
HARDWARE MODULE / DISPLAYINTERACTIVE 3DDRAG · TILT · EXPLORE
PCHardwareTest guide
Screen Test Online
Open the fullscreen test to cycle through solid colors, gradients, contrast and grayscale ramps, sharpness text, a grid, a checkerboard and color bands on your own display. The card also lists your screen resolution, available size, viewport size, device pixel ratio and color depth as reported by the browser.
Start Screen Test Online
Monitor test patterns: colors, gradients, contrast and sharpness
Solid colors expose tints and uneven brightness. Gradients and color bands show banding. Contrast and grayscale ramps show whether the darkest and lightest steps are still distinguishable, which exposes crushed blacks or clipped whites. The sharpness and text pattern reveals scaling blur, the grid helps you spot geometry problems, and the checkerboard shows moire and scaling artifacts.
Reading the resolution and pixel-ratio numbers
Screen resolution is the full panel size reported by the system, while viewport size is the space available to this page. A device pixel ratio of 2 on a 4K panel means the system is scaling the interface by 200 percent, which is normal. Color depth usually reads 24 even on panels with more bits, so treat it as a hint.
Setting up a fair test
Let the monitor warm up for ten minutes, turn off Night Light or Night Shift, and use a brightness level you normally work at. Judge black and gradient patterns in a dim room. Use the Previous, Next and Exit fullscreen controls to move through the patterns.
A reliable visual display inspection
For a useful comparison, clean the panel, disable night-light or colour filters temporarily, use the native resolution, and view the screen straight on. Return accessibility and colour settings to your preference after testing.
| What you observe | Next check | How to interpret it |
|---|
| A dot stays dark on every solid colour | Display black, white, red, green and blue full-screen patterns and inspect the same pixel. | A pixel that remains dark across patterns may be a dead pixel; confirm from a normal viewing distance and consult the display maker’s policy. |
| A dot stays one colour | Cycle through contrasting solid colours and note whether the pixel changes. | A pixel stuck on one colour may be a stuck subpixel. A browser pattern can help you see it but cannot repair or electrically diagnose it. |
| Brightness looks uneven | Compare a mid-grey and white pattern at fixed brightness in a dim, even room. | Viewing angle, local dimming, IPS glow and ambient reflections can resemble panel defects; compare from the normal seating position. |
| Gradients show bands | Check at native resolution and disable unusual GPU colour enhancements. | Some banding comes from source content, bit depth, compression or display processing rather than a defective panel. |
Important: A browser-based check reports only the events and device information exposed to the page. Confirm suspected faults with another application, cable, peripheral or operating-system diagnostic before replacing hardware.
Screen Test Online FAQ
Can this replace a hardware calibrator?
No. The patterns support visual judgement but cannot measure color accuracy.
Why does color depth show 24 on my 10-bit monitor?
Browsers commonly report 24 regardless of the panel, so the number is not a reliable measure of panel bit depth.
Does the test measure refresh rate?
No. Check your operating system's display settings for the refresh rate.
Is a gradient with visible steps a defect?
Mild banding is normal on many 8-bit panels. Strong stepping that looks uneven across the screen deserves a closer look.
Can an online screen test detect dead pixels?
It lets you spot them by eye with full-screen colors. A browser cannot electrically verify whether a pixel is defective.
Related PC hardware tests
Continue with Touchscreen Test Online, Webcam Test Online, browse the PC hardware test guides, or run the whole suite from the PC Hardware Test Online homepage.