✥
HARDWARE MODULE / GAMEPADINTERACTIVE 3DDRAG · TILT · EXPLORE
PCHardwareTest guide
Gamepad Test Online
Connect a controller, press any button, and the test lights up every button, shows both analog sticks, reads the L2/LT and R2/RT triggers as values from 0.00 to 1.00 and can trigger vibration when the browser reports haptics support. It is built for catching a sticky button, a drifting stick or a trigger that never reaches full travel.
Start Gamepad Test Online
Connecting a controller so it is detected
Plug in a wired controller or pair a wireless one first, then press a button. Browsers expose a gamepad only after its first input. The status line then shows the controller name as the browser sees it, which is also a quick way to confirm that the browser recognises a standard gamepad layout.
Analog stick drift and trigger test
Leave the sticks untouched and read the values: they should sit very close to zero. Then rotate each stick through a full circle and watch the reading reach the edge in every direction. Press each trigger slowly and confirm the value rises smoothly to 1.00. Click each stick to test the L3 and R3 buttons.
Vibration and wireless limits
The vibration button works only when the browser reports the Haptics API for that controller, and many Bluetooth connections do not expose rumble to web pages. Test over a USB cable first if the feature is missing. For wireless controllers, a low battery can cause delayed or dropped input.
A controller calibration and input check
Connect one controller at a time. Let the sticks rest before judging drift, then move each stick slowly through its full range and test buttons individually.
| What you observe | Next check | How to interpret it |
|---|
| Stick value is not zero at rest | Leave the stick untouched and note the resting value several times. | A small offset can be normal and may be handled by a game deadzone. A persistent large offset across devices suggests drift. |
| One button is missing | Reconnect the controller, press a button to wake it, and compare a wired connection if possible. | Browser mapping, controller mode and operating-system support can affect which button index is exposed. |
| Trigger jumps from 0 to 1 | Check whether the controller uses digital rather than analogue triggers. | Some controllers expose triggers as binary buttons; this is a device mapping difference, not necessarily a fault. |
| Vibration test does nothing | Check whether the browser reports haptics support and test over USB if available. | Not all controller/browser combinations expose rumble to web pages. |
Important: A browser-based check reports only the events and device information exposed to the page. Confirm suspected faults with another application, cable, peripheral or operating-system diagnostic before replacing hardware.
Gamepad Test Online FAQ
Why does the test show my controller only after I press a button?
Browsers keep gamepads hidden until the first input, which protects privacy.
Which controllers work?
Any controller the operating system exposes as a gamepad. Button numbering can differ between brands.
Is stick drift covered by warranty?
Many makers treat it as a defect, but policies vary. Note the resting values you see here when you contact support.
Why do my triggers show as buttons?
Some controllers use digital triggers that report only pressed or released, so the value jumps from 0 to 1.
Why is my controller not detected?
Connect it first, then press any button so the browser can expose it. If it still does not appear, close apps such as Steam that may be holding the device and try a USB cable.