▰
HARDWARE MODULE / BATTERYINTERACTIVE 3DDRAG · TILT · EXPLORE
PCHardwareTest guide
Battery Test Online
Read charge level, charging state, time to full and time to empty straight from your browser on devices and browsers that expose the Battery Status API. When the browser does not expose it, the card says so instead of showing invented numbers.
Start Battery Test Online
The four readouts
Level is the current charge as a percentage. Charging says whether power is flowing in. Time to full appears while charging and time to empty while discharging. Either may show unknown or an infinite value when the operating system has no estimate yet, which is common right after the power state changes.
A simple charge and discharge check
Note the level, unplug the charger and watch the charging state switch to No and a time to empty appear. Plug in again and confirm the state flips back. If it does not change when you move the cable, try another outlet, charger or cable. A level that falls by ten or twenty percent in a minute under light use can suggest a worn cell or a calibration problem.
Phones, tablets and desktops
Chromium browsers on Android and desktop expose battery data, while Safari on iPhone and iPad does not. A desktop PC with no battery typically reports a full, charging state or shows the feature as unsupported, which is expected.
How to interpret a browser battery reading
Treat the browser reading as a snapshot of charge status, not a battery health certificate. For a fair observation, note the charge level, power connection and time, then compare again after a normal period of use.
| What you observe | Next check | How to interpret it |
|---|
| Battery information is unavailable | Try a supported browser and check whether the device or browser exposes the Battery Status API. | Some browsers, platforms and privacy modes do not provide this information. Unavailable does not mean the battery is missing or faulty. |
| Charge percentage changes slowly | Allow time for the device to update its estimate and compare over a longer interval. | Battery percentage is an operating-system estimate and may update in steps; a short browser session cannot measure capacity. |
| Charging state looks wrong | Check the charger, cable, power adapter and operating-system battery indicator. | The browser reports the state exposed by the platform. It cannot verify charging current, adapter wattage or cell condition. |
| Runtime is much shorter than expected | Review operating-system battery health tools, cycle information if available, and power consumption under normal workloads. | A browser charge-level reading cannot calculate design capacity, full-charge capacity or remaining battery lifespan. |
Important: A browser-based check reports only the events and device information exposed to the page. Confirm suspected faults with another application, cable, peripheral or operating-system diagnostic before replacing hardware.
Battery Test Online FAQ
Why does time to empty say infinity or unknown?
The operating system has not produced an estimate yet, or the device is plugged in.
Does checking the battery drain it?
No. Reading the status uses negligible power.
Why does the percentage differ from my laptop maker's app?
Vendor apps may use their own calibration or reserve limits, so small differences are normal.
Does the test send battery data anywhere?
The values are read in your browser and shown on the page. The test code makes no network requests.
Why does the battery test say not supported?
Safari and Firefox do not expose the Battery Status API. Use Chrome or Edge, or check battery status in your operating system.
Can I check whether my laptop is charging online?
Yes, on browsers that expose battery data the charging field changes when you plug in or unplug the charger.