โ
HARDWARE MODULE / NETWORKINTERACTIVE 3DDRAG ยท TILT ยท EXPLORE
PCHardwareTest guide
Connection & Speed Test
Check whether your browser is online and review the connection details it exposes. Press Start Speed Test to measure download speed, upload speed, ping and jitter against Cloudflare network endpoints. Browser estimates and measured results are displayed separately.
Start Connection & Speed Test
What each field means
Status reflects the browser's online flag. Effective type, downlink and round-trip time are estimates supplied by the browser's Network Information API where supported; they are not measured speed-test results. Download and upload speed use measured data transfers to Cloudflare endpoints. Ping is an observed request round-trip time, while jitter describes variation between latency samples.
Why does my computer say it is offline?
Toggle Wi-Fi off and on and watch the status change to confirm the browser notices. If it shows online but pages fail, suspect DNS, a captive login page or an upstream router fault. If the effective type drops to 2g on a fast network, the signal may be weak or congested. Try a phone hotspot to compare.
How the speed test works
After you press Start Speed Test, this page loads the Cloudflare Speed Test measurement engine and sends download and upload test traffic to Cloudflare endpoints. It calculates throughput, latency and jitter from the completed measurements. The test may consume several megabytes of data. Cloudflare states that completed measurements are collected and used to calculate aggregated insights about internet connection quality.
The test does not start before you press the button. Read the Cloudflare Speed Test information and the PCHardwareTest Privacy Policy before running it.
How to interpret an internet speed test
Run more than once and compare results at similar times. If possible, use a wired connection for a baseline, pause large downloads, and note whether a VPN or proxy is active.
| What you observe | Next check | How to interpret it |
|---|
| Download speed is inconsistent | Repeat the test and compare Wi-Fi with Ethernet if available. | Wi-Fi signal, shared network use, server distance and congestion can change throughput. |
| Latency is high | Repeat when the network is otherwise idle and compare with a nearby service. | Latency depends on routing and destination; one browser test does not isolate the router, ISP or remote server. |
| Jitter is high during calls or games | Pause uploads, cloud backups and streaming, then repeat the measurement. | Competing traffic and wireless interference can cause variable delay; test results are a snapshot, not a service guarantee. |
| Speed test passes but a site will not load | Try another browser, check DNS/VPN/proxy settings and test the specific site separately. | A speed test reaching its measurement endpoint does not prove that every domain, DNS resolver or application service is reachable. |
Important: A browser-based check reports only the events and device information exposed to the page. Confirm suspected faults with another application, cable, peripheral or operating-system diagnostic before replacing hardware.
Connection & Speed Test FAQ
Why do some fields show a dash?
Your browser may not expose every connection value. Availability depends on browser and device support.
Is the downlink estimate my internet speed?
No. It is an estimate provided by the browser where supported. Use Start Speed Test for measured download and upload results.
Does the connection status update live?
Yes. The status listens for the browser's online and offline events.
Can this test find my IP address?
No. The connection panel does not display your public IP address.
Can this test measure internet speed?
Yes. Press Start Speed Test to measure download speed, upload speed, ping and jitter against Cloudflare network endpoints.
How is the measured speed different from the browser downlink estimate?
The downlink value is a browser-supplied estimate where supported. The speed test measures data transfers and reports results in Mbps; the two values may differ.
What are ping and jitter?
Ping is the measured round-trip response time in milliseconds. Jitter describes variation between latency samples; lower and more consistent latency is generally helpful for real-time calls and gaming.
Does this test send data to a third party?
Yes. When you start it, the browser sends test traffic to Cloudflare endpoints. Cloudflare states that completed performance measurements are collected for aggregated connection-quality insights. The test does not start automatically.
Will the test use my internet data allowance?
Yes. Download and upload measurements send network traffic and may consume several megabytes. Avoid running the test on a metered connection unless you are comfortable with that usage.
Why does my browser show limited network information?
Effective type, downlink and estimated round-trip time are exposed mainly by Chromium-based browsers. Other browsers may expose fewer fields.
Related PC hardware tests
Continue with the Battery Test Online, Speaker Test Online, Keyboard Test Online, browse the PC hardware test guides, or run the whole suite from the PC Hardware Test Online homepage.